Burrs are rough and sharp parts raised on the surface of hydraulic components, which will cause the following hazards to hydraulic pumps and hydraulic components: Reduced sealing performance: Burrs can damage the surface structure of hydraulic components and make them not smooth, thus affecting the sealing effect of seals. This will cause the working pressure of the hydraulic pump and other hydraulic components to drop, or even fail to work properly. Increased risk of leaks: Fluids can easily leak under high pressure due to burrs that can damage seals. If the surface of hydraulic components is not deburred in time, it will increase the risk of leakage. Leakage can affect system performance and reliability and can lead to system failure. Increased wear: There are burrs on the surface of hydraulic components, and the contact area of the friction surface becomes smaller, which will increase the friction coefficient of the local surface. This will increase the friction of the hydraulic components and cause more serious surface wear. Affect the quality of hydraulic oil: surface burrs are easy to attach oil stains, dust and other impurities, which will affect the quality and flow performance of hydraulic oil. At the same time, the burrs are also easy to trap air and moisture in the hydraulic oil, which will cause problems such as oxidation and corrosion in the system. To sum up, burrs are very harmful to hydraulic pumps and hydraulic components. Therefore, in the production process of hydraulic components, it is necessary to pay attention to the quality of surface treatment, and remove burrs and other rough and sharp parts in time. This can effectively improve the stability, reliability and life of the hydraulic system. 90-R-130-KN-5-NN-80-D-4-F1-L-03-GBA-35-35-28 90R130KN5NN80D4F1L03GBA353528 90R130-KN-5-NN-80-D-4-F1-L-03-GBA-35-35-28 90R130KN5NN80D4F1L03GBA353528 90-R-130-KN-5-DE-80-S-3-F1-H-03-GBA-35-35-24 90R130KN5DE80S3F1H03GBA353524 90R130-KN-5-DE-80-S-3-F1-H-03-GBA-35-35-24 90R130KN5DE80S3F1H03GBA353524 90-R-130-KN-5-DE-80-S-3-C8-H-03-GBA-35-35-24 90R130KN5DE80S3C8H03GBA353524 90R130-KN-5-DE-80-S-3-C8-H-03-GBA-35-35-24 90R130KN5DE80S3C8H03GBA353524 90-R-130-KN-5-DE-80-R-4-F1-H-03-GBA-35-35-24 90R130KN5DE80R4F1H03GBA353524 90R130-KN-5-DE-80-R-4-F1-H-03-GBA-35-35-24 90R130KN5DE80R4F1H03GBA353524 90-R-130-KN-5-DE-80-L-3-F1-H-03-GBA-29-29-24 90R130KN5DE80L3F1H03GBA292924 90R130-KN-5-DE-80-L-3-F1-H-03-GBA-29-29-24 90R130KN5DE80L3F1H03GBA292924 In addition, if there are burrs on the surface of hydraulic components, it may also cause the following problems: Affecting Oil Flow: Burrs can affect oil flow, thereby affecting oil flow. If the oil flow is insufficient, the system will work abnormally and the expected working effect will not be achieved. Exacerbating system vibration: Surface burrs will increase the surface friction of hydraulic components, which in turn will aggravate system vibration. For a long time, such vibration will damage the components of the system, affecting the life and reliability of the system. In order to avoid the above problems, we should pay attention to the maintenance of the hydraulic system, clean the burrs on the surface of the hydraulic components in time, and select high-quality hydraulic components. In addition, when processing hydraulic components, attention should also be paid to the quality and technology of surface treatment to ensure that the surface is smooth and flat, and to avoid burrs and other rough and sharp parts. This can improve the stability and reliability of the hydraulic system and effectively prolong the service life of the system. When there are burrs on the surface of hydraulic components, we can take the following measures to solve them: Machining: use machine tools, drilling machines and other equipment for machining, and remove burrs and other rough and sharp parts by polishing the surface of hydraulic components. Machining can accurately remove surface burrs, but it is relatively time-consuming and labor-intensive. Chemical treatment: through chemical treatment methods such as pickling and electroplating, the surface of hydraulic components can be smooth and bright. This method can quickly and effectively remove burrs and other rough and sharp parts, but requires the use of some special medicines and equipment, and may cause environmental pollution if not done properly. Heat treatment: Heating the surface of hydraulic components to a high temperature allows them to be plastically deformed, thereby removing burrs and other rough, sharp parts. This method can quickly and effectively remove surface burrs, but requires the use of some special equipment and techniques, making it difficult to operate. To sum up, for the rough and sharp parts such as burrs on the surface of hydraulic components, we can choose mechanical processing, chemical treatment or heat treatment to deal with them. But no matter which method is used, attention should be paid to the operating specifications to ensure safe operation and effectively improve the stability and reliability of the hydraulic system. 90-R-130-KN-5-CD-80-S-4-C8-H-03-GBA-40-40-24 90R130KN5CD80S4C8H03GBA404024 90R130-KN-5-CD-80-S-4-C8-H-03-GBA-40-40-24 90R130KN5CD80S4C8H03GBA404024 90-R-130-KN-5-CD-80-S-4-C8-H-03-GBA-23-23-24 90R130KN5CD80S4C8H03GBA232324 90R130-KN-5-CD-80-S-4-C8-H-03-GBA-23-23-24 90R130KN5CD80S4C8H03GBA232324 90-R-130-KN-5-CD-80-S-3-C8-H-03-GBA-29-29-24 90R130KN5CD80S3C8H03GBA292924 90-R-130-KN-5-CD-80-R-4-F1-H-03-GBA-30-30-24 90R130KN5CD80R4F1H03GBA303024 90R130-KN-5-CD-80-R-4-F1-H-03-GBA-30-30-24 90R130KN5CD80R4F1H03GBA303024 90-R-130-KN-5-CD-80-L-4-C8-H-03-GBA-42-42-24 90R130KN5CD80L4C8H03GBA424224 90R130-KN-5-CD-80-L-4-C8-H-03-GBA-42-42-24 90R130KN5CD80L4C8H03GBA424224 90-R-130-KN-5-CD-80-L-4-C8-F-03-GBA-35-35-24 90R130KN5CD80L4C8F03GBA353524 In addition to the above methods, we can also take the following measures during the production and processing of hydraulic components to avoid burrs on the surface: Technical specifications: Before the production and processing of hydraulic components, they should be operated in accordance with the corresponding technical specifications to ensure the specification and standardization of the production and processing process. This can effectively reduce the generation of surface burrs and improve the stability and reliability of the hydraulic system. Processing equipment: high-quality and advanced processing equipment is used to make the surface of hydraulic components smooth and flat during production and processing, reducing the occurrence of surface burrs. This can improve the working efficiency and life of the hydraulic system. Material selection: Selecting high-quality, corrosion-resistant and wear-resistant materials for production and processing can effectively reduce the generation of surface burrs and improve the service life and durability of hydraulic components. Process improvement: continuously optimize the process, improve the production and processing process, and avoid surface burrs and other rough and sharp parts. This can improve production efficiency, reduce production costs, but also improve product quality and reliability. To sum up, to avoid the occurrence of burrs on the surface of hydraulic components, it is necessary to consider many aspects such as production and processing technology, equipment, and material selection. At the same time, it is also necessary to pay attention to the maintenance of the hydraulic system, and clean the surface burrs and other rough and sharp parts in time, so as to ensure the stability and reliability of the hydraulic system.